If you’re painting a room but don’t know your roller sleeve from your overalls sleeve, Resene paint expert Murdo Shaw is here to help.

Refreshing a room with paint can have a huge effect on the way you feel about a space. However, if you’re new to DIY and don’t know where to start, follow these pro tips to paint your room to perfection. Resene paint expert Murdo Shaw is used to big painting projects like multi-unit residential buildings, but for beginners or DIYers who only have time to tackle one room at a time, he says a good result comes to doing the right prep, choosing the right paint and planning your approach.

Always protect the areas around your painting project with Resene drop cloths to reduce the risk of getting paint where you don’t want it.

When painting a room, work from the top down: ceiling, walls then trims and lastly the floor. If you paint the walls before the ceiling, then you risk getting drops and splatters from the ceiling on your freshly painted walls.

Start your property search

Find your dream home today.
Search

Haven’t planned or prepped your room for painting? Read How to paint a room: Planning and prep.

Once you’ve chosen your colours and paint products and done all the prep work, it’s time to get painting. “The standard painting order is to start at the top of the room, working your way down,” says Murdo. The usual order is ceiling, walls, trims then floor. “This is because if you paint the walls before the ceiling, then you'd get drops and splatters from the ceiling on your freshly painted walls.”

However, depending on your personal preference, painting skills and the amount of detailing in the room you might want to consider doing the trims before the walls.

“Personally, I like to paint the ceiling, then the trims, then the walls. This is because I find it much easier to cut into the edge of a wall, than cutting into something like an architrave – but that’s just my preference.”

Always protect the areas around your painting project with Resene drop cloths to reduce the risk of getting paint where you don’t want it.

Always give paint a good stir before you begin. Pigment may settle at the bottom of the can over time, which is perfectly normal, so giving it a good mix will reincorporate them to provide the best finish. This paint is Resene Alabaster, one of Resene’s Top 20 most popular colours.

Stir things up

Before you start painting, make sure you give the paint a good stir. Resene has paint stirrers especially designed for small paint cans as well as ones for 10L paint cans. If you want to power up your paint stirring, use a paint mixing attachment on a power drill.

Top class

Painting ceilings can be tiring, especially if they’ve got exposed beams or detailing. To achieve a top-notch result, take your time and work on the ceiling in sections. Two products that are suitable for painting ceilings are Resene Ceiling Paint, which has a special low-drip formula, and Resene SpaceCote Flat. If flies are an issue in your home, you might consider adding Resene Fly Deterrent, which discourages flies from sitting on the ceiling – the less they sit, the smaller and fewer the fly spots.

Always protect the areas around your painting project with Resene drop cloths to reduce the risk of getting paint where you don’t want it.

Use a good quality paintbrush for cutting in and if you’re painting your walls, cut in first with a brush before tackling the main section of the wall with a roller. Create a clean edge by masking the wall using good quality painter’s tape. This colour is Resene Blue Moon.

Cutting edge

Cutting in is an important part of painting a room, as it helps create clean edges between the wall and the trim, and around objects like light switches or heat pumps. To cut in, use a good quality paintbrush and use the edge of the brush to achieve a long, smooth line. If you’re painting your walls, cut in first with a brush before tackling the main section of the wall with a roller.

The hot dog rule

Murdo says a common mistake for rookie painters is not loading enough paint onto their roller.

“Beginners nearly always don’t put enough paint on the roller,” says Murdo. “The roller needs to have enough paint on it, so it looks like a hot dog dipped in batter. Roll the paint into the roller then leave it for 10 minutes so the paint can warm up and then roll more paint into the roller – it has to look saturated.”

Always protect the areas around your painting project with Resene drop cloths to reduce the risk of getting paint where you don’t want it.

Roll the walls in a W pattern, making sure to redistribute spots of excess paint across the wall (called laying off). This will help create an even coating of paint.

Wonder walls

To create an even coating of paint on the walls, roll the walls in a W pattern, making sure to redistribute spots of excess paint across the wall (called laying off).

To create an even coating of paint on the walls, firstly roll out the paint in a W pattern, making sure to spread the paint evenly across the section of the wall before laying off from top to bottom. I always make sure the heel of the roller (the side edge) is leading in the direction I’m painting and always lay off in the same pattern. Roller sleeves might look uniform but the fabric pile can be different depending on which way you roll it – think of it like the way you pat the hair on a dog, if you pat the dog in the other direction the hair will stick up, the same thing will happen with a roller sleeve and it will give a different stipple pattern and affect the end result.”

Resene SpaceCote is an Eco-Choice approved paint with enamel-style toughness, ideal for many walls. Another option is Resene Zylone Sheen Zero, a Sensitive Choice-approved, low-odour formula suitable for people with sensitivities and asthma.

More expert tips:

1. Never allow all the paint on your roller to be used up – keep it well loaded as you go.

2. When painting a wall, it pays to start about 400mm in from the corner. “If you start in the corner, you’ll end up with a big dollop of paint there,” says Murdo. “By starting out from the corner, you can distribute the paint around the wall easier.”

3. When rolling the wall, don’t grip the roller handle or pole too tightly – this leads to uneven pressure on the roller and lines in your paintwork. Use a gentle pressure to help guide the roller on the wall.

Mask it up

If painting trims such as skirting boards, scotias, window frames and door architraves, you’ll need to use an angled cutting in brush and either Resene Lustacryl semi-gloss or Resene Enamacryl gloss. If you’re worried about creating a clean edge, mask the wall using good quality painter’s tape.

“Don’t put so much paint on your brush that it leaks beneath the tape and wait until the paint is almost but not completely dry before removing the tape,” says Murdo.

Always protect the areas around your painting project with Resene drop cloths to reduce the risk of getting paint where you don’t want it.

Once your paint project is complete and the room is finished, soak rollers and brushes in a bucket of water for a few hours and then rinse them thoroughly under water.

The clean up

Once you’ve finished painting, it’s time to clean your roller and paintbrushes. Use a paint scraper to remove any unused from the roller or brush into a paint tray. Soak rollers and brushes in a bucket of water for a few hours and then rinse them thoroughly under water. Tap out any excess water into a piece of newspaper or an old rag, before allowing the roller or paintbrush to dry.

If you have a tricky part of your project to paint or have more questions, talk to the staff at your local Resene ColorShop or ask a Resene Paint Expert free online.

For advice on prepping and painting your project, visit your local Resene ColorShop or use the free Ask a Resene Paint Expert online, www.resene.com/paintexpert.

About MasterStroke by Resene

MasterStroke by Resene is here to help you master your paint and decorating DIY projects. Brush up on your skills with advice, tips and ideas from our trusted experts. Check out the latest how to videos at www.youtube.com/@masterstrokebyresene


Ad Tag